Optimum sizing of members of truss structures using direct design and a self-adaptive mutation differential evolution

Authors

  • Manh-Hung Ha*
  • Hoang-Anh pham

Abstract

Direct design using nonlinear inelastic analysis has been recently enabled for structural design as this approach can directly predict the behaviour of a structure as a whole, which eliminates capacity checks for individual structural members. However, the use of direct design is often accompanied by excessive computational efforts, especially for complicated structural design problems such as optimization or reliability analysis. In this study, we introduce an efficient method for the sizing optimization of truss structures employing nonlinear inelastic analysis for the direct design of structures. The objective function is the total weight of the structure while the strength and serviceability constraints are evaluated with nonlinear inelastic analysis. To save computational cost, an improved differential evolution (DE) algorithm is employed. Compared to the conventional DE algorithm, the proposed method has two major improvements: (1) a self-adaptive mutation strategy based on the p-best method to enhance the balance between global and local searches and (2) use of the multi-comparison technique (MCT) to reduce redundant structural analyses. The numerical results of a 72-bar truss case study demonstrate that the performance of the proposed method has significant advantages over the traditional DE method.

Keywords:

differential evolution, direct design, nonlinear inelastic analysis, optimization, truss

DOI:

https://doi.org/10.31276/VJSTE.63(2).39-44

Classification number

2.3

Author Biographies

Manh-Hung Ha

Faculty of Building and Industrial Construction, National University of Civil Engineering, 55 Giai Phong Street, Dong Tam Ward, Hai Ba Trung District, Hanoi, Vietnam

Hoang-Anh pham

Faculty of Building and Industrial Construction, National University of Civil Engineering, 55 Giai Phong Street, Dong Tam Ward, Hai Ba Trung District, Hanoi, Vietnam

Downloads

Published

2021-06-15

Received 16 April 2020; revised 30 June 2020; accepted 15 July 2020

How to Cite

Manh-Hung Ha, & Hoang-Anh pham. (2021). Optimum sizing of members of truss structures using direct design and a self-adaptive mutation differential evolution. Vietnam Journal of Science, Technology and Engineering, 63(2), 39-44. https://doi.org/10.31276/VJSTE.63(2).39-44

Issue

Section

Physical Sciences